TraceRush

Free tools · no upload, no account

Bleed, safe zone and cut line template generator

Enter the finished size and get a template with the three guides printers check for: bleed, the cut line and the safe zone. Open it in Illustrator, Affinity, CorelDRAW or Inkscape and build the artwork on top.

  • Bleed: extend the background to here
  • Cut line: the finished edge
  • Safe zone: keep text and logos inside

Document size with bleed: 3.250 × 2.250 in. The cut line is a spot colour named CutContour on its own layer.

Want the artwork placed on it too?

With print-ready setup we redraw your logo and artwork as vector and fit it to the template: background to the bleed, text inside the safe zone, cut line on its own layer. Our artists redraw artwork by hand as clean vector, at a fixed price, and send it back in 12 hours.

Get it hand-drawn from $12 →

How to use it

  1. 01

    Choose a rectangle or oval and enter the finished size.

  2. 02

    Set the bleed and safe margin your printer asks for.

  3. 03

    Download the PDF or SVG and place your artwork on it.

Questions

What is bleed?

Extra background beyond the finished edge, usually 1/8 inch (3 mm). Cutting is never perfectly accurate; bleed makes sure a slightly off cut lands on colour instead of leaving a white sliver.

What is the CutContour line?

The path the cutter follows. It is drawn in a spot colour named CutContour, the name most print-and-cut software looks for, so it is recognised as a cut and not printed.

PDF or SVG?

Use the PDF for Illustrator, Affinity and CorelDRAW: it carries the spot colour and the page boxes. Use the SVG for Inkscape or cutting software, where each guide arrives as its own named group.

Will every printer accept this?

The settings are the common standard, but printers differ. Check their specification sheet for bleed, safe margin and the cut line's colour name, and adjust before sending.

More free tools