Free tools · no upload, no account
DTF gang sheet calculator
Enter the design size, the quantity and your film width. The calculator works out how many fit across, how many rows you need, and the length of film the run will use.
Film needed
52.3 in (4.4 ft)
5 across, 10 rows. The last row has 0 spare spaces.
At $0.45 per inch: $23.51, or $0.47 per transfer.
Sharp transfers start with sharp art
A blurry logo prints with fuzzy edges and a white halo on every transfer of the run. We rebuild it as vector and export a 300 DPI transparent PNG at your print size. Our artists redraw artwork by hand as clean vector, at a fixed price, and send it back in 12 hours.
Get it hand-drawn from $12 →How to use it
- 01
Enter the design's width and height and how many you need.
- 02
Set your film width and the gap you leave between transfers.
- 03
Read the film length, and the cost per transfer if you enter a price per inch.
Questions
How much gap should I leave between designs?
A quarter inch (about 6 mm) is common: enough to cut between transfers without wasting film. Some shops go down to an eighth of an inch on straight-edged designs.
Does it turn designs sideways?
If you allow it, the calculator compares both orientations and uses whichever needs less film. It lays every design the same way; mixing orientations by hand can sometimes save a little more.
What film widths are common?
Desktop printers are often 13 inches; production printers are commonly 22 or 24 inches. Enter the printable width, which is slightly less than the film width.