TraceRush

← Blog ·

Print-ready label artwork: bleed, safe zone and cut lines explained

The three things a label or packaging printer checks first, and how to set them up so your file is accepted first time.

Label and packaging printers reject a lot of files, almost always for the same few reasons. Here is what they look for.

Bleed

Cutting is never perfectly accurate. If the background colour stops exactly at the edge of the label, a cut that drifts half a millimetre leaves a white sliver. Bleed is background colour extended past the edge, usually by 1/8 inch (3 mm), so the cut always lands on colour.

Safe zone

The same drift can clip anything too close to the edge. Keep text and logos at least 1/8 inch inside the cut line.

Cut line

The printer needs to know the exact shape to cut. It goes on its own layer as a vector path in a spot colour, commonly named CutContour or Dieline, set to not print. A cut line drawn into the artwork itself will be printed.

Colour

Screens show RGB; presses print CMYK or spot inks. Bright RGB blues and greens shift when converted. Set the file up in CMYK, and for brand colours that must match, specify the Pantone number.

Vector for everything except photos

Logos, text and line art should be vector so small type stays crisp. Photos stay raster, at 300 DPI at printed size.

If your artwork is a JPG, we can redraw it and set it up on your printer's dieline with bleed, safe zone and a separate cut layer.

Have a file your press can't use?

Upload it and get a hand-drawn vector back in 12 hours, or 3 with rush. Fixed price from $12.

Upload artwork →

Free tools for checking artwork